PAPER PUBLICATIONS

Dr.K.B.Judal

Dr.K.B.Judal

International Journal

  1. K. B. Judal and Vinod Yadava (2013), Electrochemical Magnetic Abrasive Machining of AISI304 Stainless Steel Tubes, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 37-43. Publisher: Springer, ISSN: 1229-8557. (SCI-E) (UGC:17411).
  2. K. B. Judal and Vinod Yadava (2012), Experimental Investigations into Cylindrical Electro-Chemical Magnetic Abrasive Machining of AISI-420 Magnetic Stainless Steel, International Journal of Abrasive Technology, Vol. 5, No. 4, pp.315-331. Publisher: Inderscience, ISSN: 1752-2641. (UGC:16301).
  3. K. B. Judal and Vinod Yadava (2013), Cylindrical Electrochemical Magnetic Abrasive Machining of AISI-304 Stainless Steel, Materials and Manufacturing Processes, Vol. 28, No. 4, pp.449-456. Publisher: Taylor and Francis, ISSN: 1042-6914. (SCI-E) (UGC:25304).
  4. K. B. Judal and Vinod Yadava (2013), Experimental Investigations into Electrochemical Magnetic Abrasive Machining of Cylindrical Shaped Non-magnetic Stainless Steel Workpiece, Materials and Manufacturing Processes, Vol. 28, No. 10, pp.1095-1101. Publisher: Taylor and Francis, ISSN: 1042-6914. (SCI-E) (UGC: 25304).
  5. K. B. Judal and Vinod Yadava (2013), Modeling and Simulation of Cylindrical Electro-Chemical Magnetic Abrasive Machining of AISI-420 Magnetic Steel, Journal of Materials Processing Technology, Vol. 213, No. 12, pp. 2089-2100. Publisher: Elsevier, ISSN: 0924-0136. (SCI-E) (UGC:21499).
  6. K. B. Judal and Vinod Yadava (2014), Modeling and Simulation of Cylindrical Electro-Chemical Magnetic Abrasive Machining Process, Machining Science and Technology Vol. 18, No. 2, pp. 221-250. Publisher: Taylor and Francis, ISSN: 1091-0344. (SCI-E) (UGC:25000).
  7. K. B. Judal and Vinod Yadava (2013), A Study of Electrochemical Magnetic Abrasive
    Machining Process, International Journal of Manufacturing Technology and Management, Vol. 27, No. 4/5/6, pp. 142-153, Publisher: Inderscience, ISSN: 1741-5195. (UGC:17116).
  8. K. B. Judal, Vinod Yadava and D.K. Pathak (2013), Study of Vibrational Frequency and Abrasive Particle Size during Cylindrical Magnetic Abrasive Finishing, International Journal of Precision Technology, Vol. 3, No. 2, pp. 117-130. Publisher: Inderscience, ISSN: 1755-2079.
  9. K. B. Judal, Vinod Yadava and D.K. Pathak (2013), Experimental Investigation of Vibration Assisted Cylindrical – Magnetic Abrasive Finishing of Aluminium Workpiece, Materials and Manufacturing Processes, Vol. 28, No. 11, pp.1196-1202. Publisher: Taylor and Francis, ISSN: 1042-6914. (SCI-E) (UGC:25304).
  10. Amit Sharma, Vinod Yadava and K. B. Judal (2013), Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet.” International Journal of Manufacturing, Materials, and Mechanical Engineering, Vol. 3, No. 2, pp. 1-16, Publisher: IGI Global, ISSN: 2156-1680. (UGC:17117).
  11. K. B. Judal (2016), “FEM Based Modeling of Cylindrical-Magnetic Abrasive Finishing (C-MAF) Process Using Unbounded Magnetic Abrasives”, ELK Asia Pacific Journals-Special Issue, ISBN:978-81-930411-8-5.
  12. Nehal I. Joshi, K. B. Judal and Ashish M. Desai (2017), “Metal matrix composites machining by Wire electro discharge machining in last decade: A Review”, International Journal of Research in Advent Technology, Vol.5, No.1, January 2017 E-ISSN: 2321-
  13. Ketual Brahmbhatt and B. Judal (2018), State of Arts: Tribological Properties of Composite materials”, International Journal of Advanced Research in Science, Engineering and Technology Vol. 5, Issue 6 , June 2018, ISSN: 2350-0328.
  14. Nehal I. Joshi, K. B. Judal and Ashish M. Desai (2018), “Fabrication of Aluminum Based Hybrid Metal Matrix Composite Using Stircasting Technique”, JASC: Journal of Applied Science and Computations, Volume V, Issue XII, pp 666-672. ISSN NO: 1076-5131.
  15. Samir K. Raval and K.B. Judal (2020) “Recent Advances in Dissimilar Friction Stir Welding of Aluminum to magnesium alloys”, Materials Today: Proceedings, Issue 22(4), pp 2665–2675, Publisher: Elsevier.
  16. A.R. Chaudhari and K.B. Judal (2021) “Experimental investigation of electro-chemical magnetic abrasive finishing of SS 304 workpiece”, Materials Today: Proceedings, 2021, ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2021.02.295. Publisher: Elsevier. ISSN 2214-7853.
  17. A.R. Chaudhari and K.B. Judal (2021) “Development and experimentation of modified electro-chemical magnetic abrasive finishing”, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2021.2016822 Publisher: Taylor and Francis, ISSN: 1091-0344. (SCI-E).
  18. G.D. Mistry, K.B. Judal (2022) “Literature review of the stress, strain and separating force evaluation during hot bar rolling of different types of steels”, Materials Today: Proceedings, ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2022.02.058.

International Conference

  1. Samir K. Raval and K.B. Judal (2019) “A Review on residual stress in friction stir welding: causes, measuring techniques, nature of distributions, consequences and control, Gujarat Technological University International Conference, ICON-2019, March 14-16, 2019.
  2. Ketual Brahmbhatt and K. B. Judal (2019), EXPERIMENTAL INVESTIGATION ON NATURAL FIBERS COMPOSITE FOR SUSTAINABLE DEVELOPMENT, International Conference on Advances in Power Generation from Renewable Energy Sources (APGRES-2019).
  3. K. B. Judal (2016), FEM based Modeling of Cylindrical-Magnetic Abrasive Finishing (C-MAF) Process using Unbounded Magnetic Abrasives, 2ndInternational  Conference on  Advancements   and   Recent   Innovations   in  Mechanical, Production   and   Industrial Engineering  (A R I M P I E -2016), ITSEC Greater Noida, April 15-16, pp.
  4. K. B. Judal and Vinod Yadava (2013), Plane Electrolytic Magnetic Abrasive Finishing: Development and Experimentation, International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2013), Punjab Technical University, Kapurthala, October 3-6, pp. 319-323.
  5. K. B. Judal and Vinod Yadava (2012), A Study in Electrochemical Magnetic Abrasive Machining, 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012), Kolkata, December 14-16, Vol. 1, pp. 363-368. (ISBN: 978-93-82062-75-2)
  6. K. B. Judal, Vinod Yadava and Lokesh Mishra (2012), Development and Experimental Study of Plane Electrolytic Magnetic Abrasive Finishing, 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012), Kolkata, December, 14-16, Keynotes and Abstracts Volume, pp. 55. (ISBN: 978-93-82062-95-0)
  7. K. Pathak, Vinod Yadava and K. B. Judal (2012), Effect of Abrasive Particle Size During Magnetic Abrasive Machining of Aluminium Tube, 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR-2012) conference, Kolkata, December, 14-16, Vol. 1, pp.374-378. (ISBN: 978-93-82062-75-2).
  8. N. Yadav, Vinod Yadava and K. B. Judal (2011), Machining of Metal Matrix Composites (MMCs) using Simultaneous influence of Abrasion and Spark Erosion: A Review, International conference on Precision, Meso, Micro and Nano Engineering (COPEN-7:2011), College of Engineering, Pune, India, December 10-11, pp. 353-358.
  9. K. B. Judal and Vinod Yadava (2010), Development of a New Abrasion Based Hybrid Finishing Technique for Fine Finishing of Difficult to Finish Materials, Proceedings of 3rd International and 24th All India Manufacturing Technology, Design and Research (AIMTDR-2010) conference, Visakhapatnam, December, 13-15,Vol-2, pp. 909-912.
  10. K. B. Judal and P. N. Boka (2010), Computer Aided Process Sequence Design for Deep-Drawn Components, Proceedings of the 3rd International and 24th All India Manufacturing Technology, Design and Research (AIMTDR-2010), at Andhra University College of Engineering(A), Visakhapatnam, December 13-15, Vol-2, pp. 1205-1210.

National Journal

 

National Conference

  1. K. Pathak, Vinod Yadava and K.B. Judal (2012), Development of Vibration Assisted Cylindrical-Magnetic Abrasive Machining Setup, Proceedings of 3rd National Conference on Advances in Manufacturing Technology, Chandigarh, March, 15-16, pp. 274-278.
  2. K. B. Judal and Vinod Yadava (2010), Review of Research Work in Magnetic Abrasive Finishing Process, Proceedings of the Golden Jubilee National Conference on Recent Advances in Manufacturing (RAM), Surat, July, 19-21, pp. 59-65. (ISBN: 978-93-80697-05-5)K. B. Judal

BOOK PUBLICATION

  1. Written Book Chapter on “Electrochemical Magnetic Abrasive Finishing” in book entitled Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes by CRC Press, Taylor and Francis Group (2016), Ch-14, pp. 353-380.